When selecting a robust fixture for daily cleaning and food preparation, the Stainless Steel Kitchen Water Spout Fixture category demands materials that resist corrosion under constant use. Our assembly builds on that expectation by pairing a solid brass cartridge with a full stainless steel body, a design philosophy that also defines the Brushed Stainless Kitchen Mixing Tap range. Unlike basic models, the wash sink mixer offers separate hot and cold flow regulation through a single spout, giving you the precise control found in a premium Stainless Steel Cooking Area Water Valve Fitting. While many fixtures simply deliver water, this unit merges durability with the smooth operation expected from a Stainless Steel Sink Water Dispensing Tap, all finished with a brushed tone that hides fingerprints and water spots across busy shifts.
Stainless Steel Wash Sink Mixer Tap Assembly units are engineered for high-traffic commercial kitchens, laundry rooms, and workshop sinks where reliability cannot be compromised. The construction starts with SUS304 stainless steel, containing 18% chromium and 8% nickel for exceptional resistance to oxidation and pitting. A ceramic disc cartridge rated to 500,000 cycles handles blending hot and cold water streams, maintaining consistent temperature without drips. The swivel spout rotates 360 degrees, allowing directional flow to large sinks or multiple basins, and is equipped with an anti-splash aerator that delivers a soft, laminar stream even at pressures above 3 bar. Connections utilize ½-inch female inlets compatible with standard galvanized pipes or braided stainless supply lines, and the mounting base includes a reinforced rubber gasket and locking nut arrangement to prevent loosening from vibration. Every component from the handle lever to the retaining ring is fabricated from stainless steel, avoiding zinc alloys that degrade over time, ensuring the assembly remains hygienic and structurally sound after years of heavy-duty washing and rinsing.
Key mechanical specifications are summarized in the table below, followed by a list of material and installation highlights for quick reference.
| Parameter | Specification |
|---|---|
| Main Body Material | SUS304 Stainless Steel |
| Cartridge Type | Ceramic disc, quarter-turn |
| Spout Reach | 220 mm (8.7 inches) |
| Spout Swivel | 360° |
| Operating Pressure | 0.5 – 8 bar (7 – 116 psi) |
| Recommended Temperature | 1°C – 90°C (34°F – 194°F) |
| Inlet Size | ½” BSP female |
| Flow Rate at 3 bar | 6.5 L/min (1.7 GPM) |
| Finish | Brushed stainless |
| Net Weight | 1.8 kg (4.0 lbs) |
The installation footprint accepts deck thicknesses from 10 mm to 25 mm using the adjustable shank and a mounting hole diameter of 35 mm. Hot inlet is marked with a red indicator ring on the hose, cold with blue, simplifying setup when connecting to underslung pipework. For wall-mounted service, an optional deck plate adapter allows retrofitting into existing two-hole configurations without altering the countertop. Mating interfaces at the valve and spout base use EPDM O-rings that withstand chlorinated water and steam cleaning procedures, preserving a watertight seal across temperature swings. All welded joints are passivated post-fabrication to restore the chromium oxide layer, giving the assembly uniform resistance to crevice corrosion in damp service environments. Whether replacing a worn-out utility faucet or specifying new equipment for a commercial galley, this mixer tap delivers the mechanical strength and steady performance required for rigorous daily operations.
