The NSS 200H Faucet Control Lever represents a precision-engineered solution for modern water delivery systems, combining user-friendly motion with exceptional durability. Whether you are upgrading a bathroom basin, kitchen sink, or utility mixer, this lever adapts effortlessly to your existing configuration. To achieve a truly synchronized setup, many installers pair it with the NSS 200H Water Tap Handgrip for added tactile grip, while the NSS 200H Water Valve Lever provides consistent valve actuation under high-pressure conditions. For those managing temperature blending, the NSS 200H Mixer Tap Control Knob allows fine incremental adjustment, and when combined with the NSS 200H Water Spout Switch Grip, the entire assembly delivers a seamless control experience from spout to handle. Each component is designed to reduce operational wear and maintain a polished appearance over time, making the NSS 200H series a favorite among plumbers and homeowners seeking reliable everyday performance.
The NSS 200H Faucet Control Lever is built around a solid brass core with a multi-layer chrome finish that resists tarnishing, scratching, and corrosion. Its slim profile fits most standard cartridge stems without requiring specialized tools, while the subtle taper at the grip end promotes a natural hand position that reduces strain during frequent use. Below you will find an organized breakdown of its key characteristics, from physical dimensions to operating tolerances, so you can confirm compatibility at a glance.
| Parameter | Specification |
|---|---|
| Base material | Lead-free brass (CW617N) |
| Surface finish | Triple-layer chrome over nickel |
| Handle length | 115 mm (4.53 in) |
| Maximum lever rotation | 90° (quarter-turn models) / 180° (ceramic cartridges) |
| Mounting thread | M6 × 1.0 internal brass insert |
| Chemical resistance | Passes ASTM B117 salt spray (200 hours) |
| Pressure tolerance | 0.05 MPa to 1.2 MPa (7.25 psi to 174 psi) |
| Net weight | 0.18 kg (0.40 lb) |
| Compatible trim kits | NSS 200H, NSS 210, NSS 225 series |
| Certifications | cUPC, NSF/ANSI 61, AB1953 compliant |
On the installation side, the NSS 200H Faucet Control Lever ships with a stainless steel set screw and a pre-applied thread-locking patch that simplifies alignment. The recessed screw cap blends into the lever body so no visible fasteners disrupt the sleek silhouette. Field reports confirm that average swap-out time remains under ten minutes, even when replacing older cross handles or dome caps. Because the lever is fully serviceable, you can replace the index ring or re-tighten the screw years later without purchasing extra parts. This backward-compatible design approach keeps the NSS 200H Faucet Control Lever relevant across multiple bathroom and kitchen generations, reducing waste and sparing you from custom fabrication.
From a maintenance perspective, daily cleaning requires nothing stronger than a soft cloth and mild soap. Abrasive pads and acidic cleaners are unnecessary, as the chrome surface naturally repels hard-water spots when squeegeed after each use. In hard-water regions, an occasional vinegar wipe around the base collar removes mineral haze without harming the finish. All internal seals are rated for chlorine exposure typical of municipal supplies, so the lever’s movement stays smooth even after prolonged contact with treated water. When paired with proper cartridge maintenance, the NSS 200H Faucet Control Lever can outlast the fixture it serves, making it a cost-effective investment for both rental properties and owner-occupied homes.
